Bantam e-STATION BC8 Charger
 |
Specification: | |
| Operating Voltage: | DC 11-18 volts | |
| Idling Current: | approx. 100mA | |
| Charge/Discharge Power: | Max. 150/30 Watts | |
| NiCd/MH: | 1-27 Cells | |
| Lilo/LiPo/LiFe: | 1-8 Series | |
| Pb: | 2-36 Volts | |
| Charge Current: | 0.1 to 7.0A | |
| Discharge Current: | 0.1 to 15.0A | |
| No. of Cycles: | 1 to 5 times | |
| Battery Data Memory: | Up to 10 data | |
| Weight: | 1000g | |
| Dimensions: | 160x120x40 mm | |
The Bantam e-STATION BC8 is a mircoprocessor controlled high-performance rapid charger/discharge for NiCd/NiMH/LiPo/Pb batteries with cell voltage balancer. It has a USB PC Link, temperature sensor and an integrated Lithium battery balancer. It has a charge current up to 7A, a discharge current up to 5A.
| User's Setting-Up Parameters: | |
|
Lithium Battery Voltage Type:
|
LiLo:3.6V, LiPo:3.7V, LiFe:3.3V
|
|
NiCd Delta-peak Voltage Sensitivity:
|
2 to 20mV
|
|
NiMH Delta-peak voltage Sensitivity:
|
2 to 20mV
|
|
Battery temperature cut-off:
|
20 to 80C or OFF
|
|
Waste time between charge/discharge:
|
1 to 60 min.
|
|
Trickle Charge Mode:
|
ON/OFF, up to 200mA.
|
|
Integral timer limit for safety:
|
10 to 720 min.or OFF
|
|
Maximum charging capacity limit for safety:
|
10 to 9990mAh or OFF
|
|
Key beep and buzzer sound:
|
ON/OFF
|
|
Input power low alert:
|
10 to 11V
|
Optimised Operating Software - When charging or discharging, BC8 has an 'AUTO' function that sets the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users descretion.
High-power and high-performance circuit - BC8 employs the circuit that has maximum output power of 150W. As a result it can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium batteries with maximum current of 7.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program.
Individual Voltage Balancer for Lithium Batteries Inside - BC8 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.
Balance Individual Cells on Discharge - BC8 also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Lithium 'Fast/Storage' Mode Charge - You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.
Battery Data Store/Load - For users convenience it can store a maximum of 10 batteries data. You can set a program for the battery to be charged or discharged continually. This program then be called easily time and time again.
Cyclic Charging/Discharging - Performs 1 to 5 cycles of charge-discharge or discharge-charge continually for battery refreshing and balancing.
Further product information on pricing and instruction manual - CLICK HERE!